2020年1月19日新疆伽师MS6.4地震InSAR同震形变场特征及发震构造初步探讨     

温少妍  李成龙  李金 《内陆地震》2020,(1):1-9

基于Sentinel-1 SAR升、降影像,利用D-InSAR技术获取新疆伽师M S6.4地震的同震形变场,结果表明,本次地震引起的同震形变场整体呈近椭圆状分布,形变区东西长约66 km,南北宽约40 km,整个形变场由南部隆升区和北部沉降区组成,南部最大隆升量约7 cm,北部最大沉降量约3 cm。本次地震发生在块体俯冲界面处的低倾角逆冲推覆构造带上,隆升和沉降两个中心均位于逆冲推覆体的上盘,形变主要以隆升形变为主,符合低倾角逆断层中强震的变形特征。在沉降区与隆升区之间干涉条纹连续分布,未出现表征地表破裂位置的空间失相关带,表明地震未引起明显的地表破裂。结合震源机制、余震精定位及区域构造特征,初步推断认为伽师地震的发震构造可能为柯坪塔格推覆构造前缘的N倾的柯坪断裂。  相似文献   

辽东铀成矿带连山关地区韧性剪切带与铀成矿作用     

吴迪  刘永江  李伟民  常瑞虹 《岩石学报》2020,36(8):2571-2588

连山关地区位于华北克拉通北缘铀成矿省辽东铀成矿带，已知铀矿床（点）均发育在韧性剪切带附近。为了解韧性剪切带运动学、几何学构造变形机制及与铀矿的关系，本文以连山关岩体周缘韧性剪切带为研究对象，通过野外宏观调查和室内微观研究相结合的研究方法，探讨构造变形期次、韧性剪切带形成机理及其对铀成矿的控制作用。研究表明：连山关岩体周缘发育的韧性剪切带与近南北向挤压构造变形有关，其右行韧性剪切带应变类型为压扁应变，属于一般压缩-平面应变范围，Flinn指数K值在0.19~0.69之间，岩石类型属于S/SL型构造岩。研究区内铀矿体均为隐伏盲矿体，主要赋存于沿着连山关岩体和辽河群接触带右行剪切作用形成的背斜褶皱核部，和北东东向断裂关系密切。综合分析认为，连山关岩体南缘北西向韧性剪切带为一级控矿构造，是区内铀矿热液运移的通道，而剪切带边部的晚期北东东向断裂则是铀矿储存空间；铀源可能来自于太古宙古风化壳，并在大型韧性剪切活动（提供热液运移通道）和基性脉岩侵入（提供热源和还原剂）等综合因素作用下运移、富集成矿。  相似文献   

开挖前降水引发基坑变形机制模型试验研究     

曾超峰  薛秀丽  宋伟炜  李淼坤  白宁 《岩土力学》2020,41(9):2963-2972

现有基坑相关研究主要关注土方开挖过程引起的变形，认为围护结构变形起点是土方第1次开挖。然而，一些工程实测表明，基坑开挖前降水阶段即可引起围护结构及周边地层发生厘米级的变形。显然，未考虑开挖前变形的基坑监测数据将低估基坑施工的环境效应。为了研究基坑开挖前降水引发基坑变形的机制，开展了室内模型试验，对基坑开挖前降水过程进行了缩尺精细化模拟。通过微型降水井的设置与调控，模型试验真实再现了实际基坑降水过程中井流效应对围护结构受力变形的影响。试验过程中发现，随着降水的进行，坑外降水漏斗不断扩展，围护结构悬臂式侧移及坑外拱肩式地面沉降也随之产生。另外，降水导致墙前水压力明显减小，并诱发墙前侧向总压力重分布（以减小为主），围护结构为此发生指向坑内的悬臂式运动以寻求新的受力平衡，并通过墙后土体损失诱发坑外地层变形。  相似文献   

中-哈-吉-乌天山变形带容矿金矿床:成矿环境和控矿要素与找矿标志     

薛春纪  赵晓波  赵伟策  赵云  张国震  Bakhtiar NURTAEV  Nikolay PAK  莫宣学 《地学前缘》2020,27(2):294-319

天山是全球第二大金矿富集区,世界级和大型-超大型金矿床东西成带横贯中国新疆中部—哈萨克斯坦东南部—吉尔吉斯斯坦—乌兹别克斯坦,构成巨型跨境金成矿带。天山巨型跨境金成矿带和重要金矿床形成的地质环境、成矿的控制要素、找矿勘查的标志都是学术界和工业界高度关注的重大地质和找矿问题。通过广泛、深入地文献调研和境内外天山较全面野外地质矿产调查与研究,本文认为中-哈-吉-乌天山大规模金成矿主体形成于晚石炭世—早二叠世古亚洲洋闭合后的陆块拼贴变形过程,部分形成于中—晚二叠世陆内走滑变形过程。中天山南、北缘古缝合带及其附近的大型脆性/韧-脆性变形带是巨量金成矿的关键控制因素,多期叠加复合成矿是天山变形带容矿金矿床的显著特征。地壳初始富集、构造变形活化、岩浆热液叠加是天山变形带容矿金矿床的主控因素。“碳质细碎屑岩+脆韧性变形带+海西末期岩体”是中-哈-吉-乌天山变形带容矿大型-超大型金矿的找矿标志组合。  相似文献   

非典型周期和气候突变的识别与判定          下载免费PDF全文

秦建国 《水文》2020,40(1):23-28

通过两种新方法分析了无锡站降水年际变化的突变性、周期性等特征,揭示了旱涝演化的自然规律。研究表明,1934、1978、2013年是我国近现代气候突变的临界点,这是旱涝演化的自然选择;无锡站年际降水的观测历史可分成四个特征不同的时段,每个时段节点对应的都是一次气候突变;气候突变会改变年际降水序列的一致性,分段法研究可以大幅度降低模拟难度、提高预测效率。发现并确认了3个气候突变点,实现了超长缺测中断期(13a)旱涝趋势的精确插补,完成了无锡站近百年降雨序列的周期性分析与旱涝趋势预测模拟,研究成果改变了近现代气候历史无法细分的现状。  相似文献   

函数模型与随机模型双约束的GPS-InSAR数据融合方法建立三维形变场     

马艳鸽  赵丽华  张盼盼  吕佳凝 《大地测量与地球动力学》2019,39(11):1112-1117

针对InSAR技术研究地表三维形变时监测信息不足的问题，以GPS监测信息为先验信息，建立附有随机模型约束的地表三维形变模型。考虑到SAR卫星极轨方式运行导致LOS向观测量对南北向形变不敏感的问题，以GPS南北向形变观测值作为强约束，构建三维形变解算的函数约束条件。模拟数据与西安地区实测数据的计算结果表明，基于随机模型与函数模型共同约束的地表三维形变参数最小二乘解的精度优于仅有函数模型约束或仅有随机模型约束及无任何约束的参数解精度。  相似文献   

Fully coupled hydraulic fracture simulation using the improved element partition method     

Shujun Peng  Zhennan Zhang  Jianye Mou  Bing Zhao  Zhiyuan Liu  Jiading Wang 《国际地质力学数值与分析法杂志》2019,43(1):441-460

The improved element partition method (IEPM) is a newly developed fracture simulation approach. IEPM allows a fracture to run across an element without introducing extra degrees of freedom. It can also simulate any number of fractures in a prescribed mesh without remeshing. In this study, the IEPM is extended to hydraulic fracture simulation. First, the seepage and volumetric storage matrix of a cracked element are derived using virtual nodes (the intersection points of a crack with element edges). Subsequently, the fully coupled hydromechanical equation is derived for this cracked element. To eliminate the extra degrees of freedom (virtual nodal quantities), the water pressure and displacement of the virtual nodes are associated with their adjacent nodes through least squares interpolation. Finally, the fully coupled equation in terms of nodal quantities is obtained. The verification cases validate the method. By using this method, the field-scale hydraulic fracturing process is well simulated. The proposed approach is simple and efficient for field-scale hydraulic fracture simulation.  相似文献   

鄂尔多斯地块周缘垂直形变场负位错反演与应变积累研究     

张希  刘立炜  郝明  白卓立 《大地测量与地球动力学》2019,39(6):551-556

利用鄂尔多斯地块及其周缘1970～2014年的垂直形变速率场资料，借助负位错反演研究该区域长期应变积累。结果表明，地块东北缘山西断陷带中北段年均能量积累增量、剪应力强度都较高，西南缘六盘山断裂与渭河断裂西段次之；山西断陷带中南段至晋陕交界处年均剪应力强度较高且显示一定程度的能量积累；西秦岭构造区尤其西秦岭北缘断裂西段、晋冀蒙交界区也反映一定程度的能量积累特性。  相似文献   

A modified numerical calculation method of collapse pressure for thick-walled offshore pipelines     

《Applied Ocean Research》2019

Considering the shear deformation and thickness stretching of large deformation, a modified numerical calculation method based on the thick shell theory is established to determine the collapse pressure of thick-walled pipes. Verification experiments are conducted on ten pipe specimens in hyperbaric chambers. The good agreement between experimental results and numerical predictions shows the validity and reliability of the new numerical calculation method. Combining DNV specification, the characteristic collapse pressure is also calculated for comparison. The difference between experimental results and DNV calculations illustrates the latter one is much conservative in predicting collapse pressure for thick-walled pipes. Sensitivity analysis on manufacturing imperfections and material properties is investigated for pipes with different D/t ratios. Thick-walled pipes are easier to be affected by initial ovality, residual stress and hardening factor. Based on the stress distribution at the moment of collapse, a novel discovery is found that the collapse pressure of thick-walled pipes is dominated by material plastic behavior.  相似文献   

The recognition of former melt flux through high‐strain zones          下载免费PDF全文

Catherine A. Stuart  Sandra Piazolo  Nathan R. Daczko 《Journal of Metamorphic Geology》2018,36(8):1049-1069

High‐strain zones are potential pathways of melt migration through the crust. However, the identification of melt‐present high‐strain deformation is commonly limited to cases where the interpreted volume of melt “frozen” within the high‐strain zone is high (>10%). In this contribution, we examine high‐strain zones in the Pembroke Granulite, an otherwise low‐strain outcrop of volcanic arc lower crust exposed in Fiordland, New Zealand. These high‐strain zones display compositional layering, flaser‐shaped mineral grains, and closely spaced foliation planes indicative of high‐strain deformation. Asymmetric leucosome surrounding peritectic garnet grains suggest deformation was synchronous with minor amounts of in situ partial melting. High‐strain zones lack typical mylonite microstructures and instead display typical equilibrium microstructures, such as straight grain boundaries, 120° triple junctions, and subhedral grain shapes. We identify five key microstructures indicative of the former presence of melt within the high‐strain zones: (a) small dihedral angles of interstitial phases; (b) elongate interstitial grains; (c) small aggregates of quartz grains with xenomorphic plagioclase grains connected in three dimensions; (d) fine‐grained, K‐feldspar bearing, multiphase aggregates with or without augite rims; and (e) mm‐ to cm‐scale felsic dykelets. Preservation of key microstructures indicates that deformation ceased as conditions crossed the solidus, breaking the positive feedback loop between deformation and the presence of melt. We propose that microstructures indicative of the former presence of melt, such as the five identified above, may be used as a tool for recognising rocks formed during melt‐present high‐strain deformation where low (<5%) volumes of leucosome are “frozen” within the high‐strain zone.  相似文献